top of page

Jotting Note

Some draft notes

廣告設計師 + 企業合作軟體講師

部落格區域長期施工中。

原本當成個人隨手資料筆記用途,簡單記錄下感興趣的內容讓自己想看時方便點。

年會努力在工作之餘花時間整頓一下這個區域。

偶然查資料迷路點進來的人,有出處的文獻會有網址。可到原本出處看詳細圖文 :)

2023.4

搜尋

Canon G2020 顏色很淡 - 無邊界模式 prints lightly on borderless mode

Canon PIXMA G2000 prints lightly on borderless mode


當發現「只有無邊界模式會變淡,但一般模式顏色正常」,

只需要把紙張選項,改成「普通紙」以外的選項即可。(這裡指的是印刷設定,不是指現實中的紙)

例如改「相片紙」、「Matte photo paper」模式。


會出現這問題,是因為Canon公司認為無邊界模式顏料用的較多,

太薄的紙會過於潮濕,而將預設值「普通紙」的用墨減少。


When it is noticed that 'Only Borderless mode appears faded, but Normal mode has correct colors,' simply change the paper option to anything other than 'Plain Paper' in the print settings. (Here, 'paper' refers to the print settings, not actual physical paper.)

For instance, switch to modes like 'Photo Paper' or 'Matte Photo Paper.'

This issue arises because Canon believes that Borderless mode consumes more ink, and using very thin paper could lead to excessive dampness. Therefore, the default ink usage for the 'Plain Paper' setting is reduced.


相同問題討論區-解決方案:


When doing borderless printing, try setting the paper type to Photo Paper. It should also allow you to set 'High Quality' which would normally be greyed-out.

Give this a try and let us know if it makes any difference :)

最新文章

查看全部

Comments


bottom of page